top of page

SPH Engineering

•

Single beam, single frequency

SPH ECT 400S single beam kit

SPH Engineering's lightest drone echosounder kit. A 450 kHz Echologger sensor towed on a cable beneath the drone, built for shallow ponds, basins and creeks.

Frequency

450 kHz

Range

0.15 to 100 m

Beam width

5°

System weight

From 1.6 kg

Overview

The ECT 400S is the simplest way into drone bathymetry with SPH Engineering. The sensor hangs on a cable below the drone and is towed just under the surface, while SkyHub and a radar altimeter hold the drone at a constant height and log every reading with its position.

Its narrow 5° beam and 450 kHz frequency suit shallow water and fine detail. It reports depth to the first thing the sound meets, so in weedy water it can read the top of the weed rather than the bed. If that sounds like your site, look at the dual-frequency ECT D024S.

Key features

✔

450 kHz single frequency with a narrow 5° beam

✔

Accuracy 0.2% of depth, with resolution under 1 mm

✔

Built-in tilt sensor rejects readings when the sensor swings off vertical

✔

Water temperature logged with every reading

✔

Logging starts automatically when the sensor is submerged and stops when it leaves the water

✔

Continuous survey lines, waypoint "shots" for weedy water, or manual mode

✔

Live depth on the ground station in UgCS

✔

Light (1.6 kg) or heavy (2.6 kg) housing

Best for

✔

Shallow ponds, stormwater basins and small reservoirs

✔

Creeks and drains with no safe boat access

✔

Sites where you want the lightest possible setup

✔

Not suited to sediment thickness work (see the ECT D052S)

What's in the box

✔

450 kHz single frequency with a narrow 5° beam

✔

Accuracy 0.2% of depth, with resolution under 1 mm

✔

Built-in tilt sensor rejects readings when the sensor swings off vertical

✔

Water temperature logged with every reading

✔

Logging starts automatically when the sensor is submerged and stops when it leaves the water

✔

Continuous survey lines, waypoint "shots" for weedy water, or manual mode

✔

Live depth on the ground station in UgCS

✔

Light (1.6 kg) or heavy (2.6 kg) housing

Specifications

Sensor

Echologger ECT 400S

Type

Single beam, single frequency

Frequency

450 kHz

Measurement range

0.15 to 100 m

Beam width

5° (conical, -3 dB)

Accuracy

0.2% of depth

Resolution

Under 1 mm

Built-in sensors

Tilt and water temperature

Interface

RS232

Sensor weight

275 g

System weight

1.6 kg (light housing), 2.6 kg (heavy housing)

Tow speed

0.5 to 0.7 m/s

Survey modes

Continuous lines, waypoints, manual

Data formats

CSV, NMEA 0183, SEG-Y

Processing

HydroMagic, Reefmaster, Surfer and other XYZ tools

Compatible drones

DJI M400, M350 RTK and M300 RTK, Inspired Flight IF800 and IF1200A, and other drones of comparable size

Manufacturer figures (SPH Engineering). Range is measured from the bottom of the transducer. In practice the sensor needs about 15 cm of water to stay submerged.

Buy, hire or try

SPH systems are available on request. Ask us about hire or a demonstration on your site.

Related products

MBES-card.jpg

Single beam, dual frequency

SPH ECT D024S dual-frequency kit

A dual-frequency SPH kit that reads the top of the weed at 450 kHz and the true bed at 200 kHz in the same pass. The all-rounder for dams, reservoirs and weedy ponds.

MBES-card.jpg

Single beam, dual frequency

SPH ECT D052S sediment kit

SPH's deep-water and sediment kit. Its 50 kHz channel pushes through soft sediment to the harder layer below, so you can estimate sediment thickness as well as depth.

MBES-card.jpg

Drone multibeam echosounder

EchoNIMBUS-MBES

A drone-based multibeam echosounder that turns your drone into an efficient bathymetric survey tool. Dense 3D coverage of reservoirs, rivers, ponds and flooded areas, without launching a boat.

Modern Bathy Drone Office Collaboration.png

Enquire about

SPH ECT 400S single beam kit

Tell us the water body, depth range and drone you fly, and we'll confirm the 400S suits the job and send a quote.

Call

1300 900 303

Get workshop dates and product news

New gear, upcoming workshops and practical guides. A few emails a year, no spam.

By subscribing, you agree to receive emails from Bathy Drone Solutions. Unsubscribe any time. See our Privacy Policy.

bottom of page