top of page

SPH Engineering

•

Single beam, dual frequency

SPH ECT D024S dual-frequency kit

A dual-frequency SPH kit that reads the top of the weed at 450 kHz and the true bed at 200 kHz in the same pass. The all-rounder for dams, reservoirs and weedy ponds.

Frequency

200 / 450 kHz

Range

Up to 200 m

Beam width

10° / 5°

System weight

From 1.6 kg

Overview

Two frequencies, one sensor. The 450 kHz channel reports the first surface the sound meets, which in weedy water is often the top of the vegetation. The 200 kHz channel passes through the weed to give a clean bottom reading. Comparing the two shows you where the vegetation is and keeps it out of your volumes.

It weighs the same as the ECT 400S but reaches up to 200 m at 200 kHz, so it covers most inland water bodies. For sediment thickness, step up to the ECT D052S.

Key features

✔

Dual frequency, 200 and 450 kHz, logged together

✔

200 kHz passes through weed and vegetation to the bed

✔

Range up to 200 m at 200 kHz

✔

Accuracy 0.2% of depth, with resolution under 1 mm

✔

Built-in tilt and water temperature sensors

✔

Automatic logging, waypoint mode for heavy weed, live depth in UgCS

✔

Light (1.6 kg) or heavy (2.6 kg) housing

Best for

✔

Dams, water storages and reservoirs

✔

Weedy ponds, wetlands and irrigation channels

✔

Deeper inland water, up to 200 m

✔

Not suited to sediment thickness work (see the ECT D052S)

What's in the box

✔

Dual frequency, 200 and 450 kHz, logged together

✔

200 kHz passes through weed and vegetation to the bed

✔

Range up to 200 m at 200 kHz

✔

Accuracy 0.2% of depth, with resolution under 1 mm

✔

Built-in tilt and water temperature sensors

✔

Automatic logging, waypoint mode for heavy weed, live depth in UgCS

✔

Light (1.6 kg) or heavy (2.6 kg) housing

Specifications

Sensor

Echologger ECT D024S

Type

Single beam, dual frequency

Frequency

200 / 450 kHz

Measurement range

0.5 to 200 m (200 kHz), 0.15 to 100 m (450 kHz)

Beam width

10° (200 kHz), 5° (450 kHz)

Accuracy

0.2% of depth

Resolution

Under 1 mm

Built-in sensors

Tilt and water temperature

Interface

RS232

Sensor weight

280 g

System weight

1.6 kg (light housing), 2.6 kg (heavy housing)

Tow speed

0.5 to 0.7 m/s

Data formats

CSV, NMEA 0183, SEG-Y

Processing

HydroMagic, Reefmaster, Surfer and other XYZ tools

Compatible drones

DJI M400, M350 RTK and M300 RTK, Inspired Flight IF800 and IF1200A, and other drones of comparable size

Manufacturer figures (SPH Engineering). Range is measured from the bottom of the transducer. In practice the sensor needs about 15 cm of water to stay submerged.

Buy, hire or try

SPH systems are available on request. Ask us about hire or a demonstration on your site.

Related products

MBES-card.jpg

Single beam, single frequency

SPH ECT 400S single beam kit

SPH Engineering's lightest drone echosounder kit. A 450 kHz Echologger sensor towed on a cable beneath the drone, built for shallow ponds, basins and creeks.

MBES-card.jpg

Single beam, dual frequency

SPH ECT D052S sediment kit

SPH's deep-water and sediment kit. Its 50 kHz channel pushes through soft sediment to the harder layer below, so you can estimate sediment thickness as well as depth.

MBES-card.jpg

Drone multibeam echosounder

EchoNIMBUS-MBES

A drone-based multibeam echosounder that turns your drone into an efficient bathymetric survey tool. Dense 3D coverage of reservoirs, rivers, ponds and flooded areas, without launching a boat.

Modern Bathy Drone Office Collaboration.png

Enquire about

SPH ECT D024S dual-frequency kit

Tell us the depths and bed conditions you're working with, plus the drone you fly. We'll confirm whether dual frequency suits your site and send a quote.

Call

1300 900 303

Get workshop dates and product news

New gear, upcoming workshops and practical guides. A few emails a year, no spam.

By subscribing, you agree to receive emails from Bathy Drone Solutions. Unsubscribe any time. See our Privacy Policy.

bottom of page