top of page

SPH Engineering

•

Single beam, dual frequency

SPH ECT D052S sediment kit

SPH's deep-water and sediment kit. Its 50 kHz channel pushes through soft sediment to the harder layer below, so you can estimate sediment thickness as well as depth.

Frequency

50 / 200 kHz

Range

Up to 200 m

Beam width

27° / 7°

System weight

2.7 kg

Overview

The 200 kHz channel reads the top of the bed, while the 50 kHz channel penetrates organic or light sediment to reach the hard bottom. The difference between the two gives you an estimate of sediment thickness, which is why this is the go-to kit for tailings ponds, oxidation ponds and pre-dredge surveys.

It is the sensor used to monitor a tailings storage facility pond at the Oyu Tolgoi mine in Mongolia (see our case study). At 460 g it is the heaviest of the three SPH sensors, so we check your drone's payload with you before you order.

Key features

✔

Dual frequency, 50 and 200 kHz

✔

50 kHz penetrates soft sediment for thickness estimates

✔

Range up to 200 m

✔

Accuracy 0.2% of depth, with resolution under 1 mm

✔

Built-in tilt and water temperature sensors

✔

SEG-Y output keeps the full echo for detailed sediment analysis

✔

Automatic logging and live depth in UgCS

Best for

✔

Tailings storage facilities and oxidation ponds

✔

Sediment and depth surveys before dredging

✔

Sludge volumes at waste stabilisation ponds

✔

Deep pits and reservoirs, up to 200 m

What's in the box

✔

Dual frequency, 50 and 200 kHz

✔

50 kHz penetrates soft sediment for thickness estimates

✔

Range up to 200 m

✔

Accuracy 0.2% of depth, with resolution under 1 mm

✔

Built-in tilt and water temperature sensors

✔

SEG-Y output keeps the full echo for detailed sediment analysis

✔

Automatic logging and live depth in UgCS

Specifications

Sensor

Echologger ECT D052S

Type

Single beam, dual frequency

Frequency

50 / 200 kHz

Measurement range

1.0 to 200 m (50 kHz), 0.5 to 200 m (200 kHz)

Beam width

27° (50 kHz), 7° (200 kHz)

Accuracy

0.2% of depth

Resolution

Under 1 mm

Built-in sensors

Tilt and water temperature

Interface

RS232

Sensor weight

460 g

System weight

2.7 kg

Tow speed

0.5 to 0.7 m/s

Data formats

CSV, NMEA 0183, SEG-Y

Processing

HydroMagic, Reefmaster, Surfer and other XYZ tools

Compatible drones

DJI M400, M350 RTK and M300 RTK, Inspired Flight IF800 and IF1200A, and other drones of comparable size

Manufacturer figures (SPH Engineering). Range is measured from the bottom of the transducer. In practice the sensor needs about 15 cm of water to stay submerged.

Buy, hire or try

SPH systems are available on request. Ask us about hire or a demonstration on your site.

Related products

MBES-card.jpg

Single beam, single frequency

SPH ECT 400S single beam kit

SPH Engineering's lightest drone echosounder kit. A 450 kHz Echologger sensor towed on a cable beneath the drone, built for shallow ponds, basins and creeks.

MBES-card.jpg

Single beam, dual frequency

SPH ECT D024S dual-frequency kit

A dual-frequency SPH kit that reads the top of the weed at 450 kHz and the true bed at 200 kHz in the same pass. The all-rounder for dams, reservoirs and weedy ponds.

MBES-card.jpg

Drone multibeam echosounder

EchoNIMBUS-MBES

A drone-based multibeam echosounder that turns your drone into an efficient bathymetric survey tool. Dense 3D coverage of reservoirs, rivers, ponds and flooded areas, without launching a boat.

Modern Bathy Drone Office Collaboration.png

Enquire about

SPH ECT D052S sediment kit

Tell us what you need to measure, whether that's sediment build-up, sludge or soft bed layers, plus the drone you fly. We'll confirm the D052S suits the job and send a quote.

Call

1300 900 303

Get workshop dates and product news

New gear, upcoming workshops and practical guides. A few emails a year, no spam.

By subscribing, you agree to receive emails from Bathy Drone Solutions. Unsubscribe any time. See our Privacy Policy.

bottom of page